CYCLONE 3000 - SICK BIKE PARTS NEW ELECTRIC SHIFTER KIT !! .
COMPACT CYCLONE CONTROLLER - KIT CAN BE USED UP TO 72V (with correct throttle)
36V OR 48V OR OTHER??? Select voltage. If other than 36 V or 48 V please contact us before ordering.
EXCEPTIONAL VALUE. COMPARE TO OTHER ELECTRIC BIKES WITH MUCH WEAKER SYSTEMS, LESS RANGE FOR MUCH MORE MONEY THAN THE SBP ELECTRIC KIT.
RANGE: 15-35+ miles are obtainable depending on the AH of your battery. A rough rule of thumb, depending on battery type and many other variables, on a flat surface, 170 pound rider you will get 1.0-2.0 miles or more per 1 amp hour. A few gentle pedals during a ride greatly adds to range, with little effort. Remember this is a rough estimate - if you ride like a motocrosser, live in the hills, are heavy, don't pedal at all - range will be less. Safe, fun and efficient. And frankly the brutish torque of a mountain goat. Just add bike and battery and no more gasoline needed. Sick Bike Parts offers more parts, stronger longer running for less money all of course with the ability to use the gears on your bike with the motor. Compare to the cost of pre-made hub motor bikes and compare to other electric bikes with no gears. Gears give increased range, more hill climbing efficiency and the ability to pedal assist for even more range.
Comes with the parts you need to make your bike a real viable alternate transportation vehicle. With solar panels you can charge your bike off the grid and really gain energy independence.
Installation is much easier than gas engine installation. And yes some bicycle mechanical knowledge will be extremely helpful, it is not absolutely required. Everything has connectors and is true plug and play with only a single mate for each connector style (mistake proof).
The kit comes with the following:
3000w brushless motor can be controller limited for on road regulated use, but is rugged, heavy duty and has strong torque for off road use. Built in regreaseable HD planetary gear box.
Freewheeling motor sprocket w/set screws
Compact Controller continuous up to ~3000W, 40A continuous, Max 100A
48 or 36 Volt (your choice) twist throttle with battery charge indicator LED's and main power switch
Note the thumb throttles are only for 36V or 48V - however we do have the 12V-72V Thumb throttle optional
Mount kit with motor brackets
Battery Pigtail for ease of connecting to any style of battery
1x 44Tooth and 1x 36Tooth Chainrings
HD 410 Chain
Larger Mount hardware for motor and controller
153 mm bottom bracket cartridge
Left and Right Freewheel Crank
NOTE: If you are attempting to use this kit on a "FAT TIRE" bike please contact us directly. This kit is based on it being installed onto a "standard" bicycle. Fat Tire bikes may have special needs.
We recommend a 15, 20 or more amp hour battery. Please do not go cheap on the battery, a cheap battery won't last. Our supplied pigtail makes connection easy. Suggested sources for batteries:
EM3ev - http://em3ev.com/store/index.php?route=common/home
Ping Battery - http://www.pingbattery.com/servlet/StoreFront
HOTLINK: Ping Battery
Posted by richard whitmire on May 8th 2016
Motor and controller work very well. The power comes on smooth and there is plenty of it. We are able to go up some steep hills and on flat ground hit 30 mph. The throttle has pretty good action but the led indicators are not very accurate and show a full battery when it's practically dead. The install did come with everything needed and was not overly difficult but did require some extra communication with SBP. They were helpful and quick to respond but a certain amount of bicycle and mechanical knowledge is necessary.